Contractor compliance management in the UK: insurance, RAMS and site cards in one view
UK contractors arrive with a long paper trail: insurance certificates, RAMS, competence cards, accreditation and right to work records, each on its own renewal cycle. This guide sets out what to check, where checks typically fail and how AuditSci turns the routine into a queue your team can clear.
No credit card requiredWhy contractor compliance is hard to hold together in the UK
A facilities, construction or manufacturing manager rarely deals with one contractor. There is the main contractor, its subcontractors, the agency labour behind them and the specialist who turns up for one shutdown. Each brings company documents and each worker brings their own, and the two sets expire on different dates for different reasons.
Health and safety law in Great Britain expects you to take reasonable steps to make sure the people you bring onto your premises or project are competent and properly covered. What counts as reasonable depends on the work, the site and the contract, and your clients often add their own requirements on top. This guide is general information, not legal advice. Confirm the position for your own operation against current HSE guidance and your contracts.
The practical difficulty is not knowing what to ask for. It is knowing, on any given Monday, which of three hundred documents has quietly lapsed, which was received but never read, and which requirement was never added for the new site.
Where the duty sits under CDM 2015
On construction projects, the Construction (Design and Management) Regulations 2015 give specific duties to the client, the principal contractor and other duty holders. In general terms, the client must make suitable arrangements for managing the project, and the principal contractor plans, manages and monitors the construction phase, which includes checking that the people it appoints have the skills, knowledge and experience for the task. Outside construction the same question still arises under general health and safety duties, so the habit of checking competence before work starts is worth keeping everywhere.
UK contractor documents: what to verify and how checks fail
Requirements vary by client, sector and contract, so treat this as a working list to adjust rather than a standard. It matches the kind of documents AuditSci's suggested UK catalogue is built around, and you can edit every item.
| Document | What to verify | Typical failure |
|---|---|---|
| Employers' liability insurance | Policy period, that the insured entity is the one that actually employs the people on your site, and that the limit meets your contract. Most employers with staff must hold it by law. | The certificate names a parent company or a different trading entity, or the policy renewed and nobody asked for the new certificate. |
| Public liability insurance | Policy period, limit of indemnity against what your contract requires, and any wording the contract asks for. | Cover in force, but at a lower limit than the contract, or for a different type of work than the one being carried out. |
| Professional indemnity insurance | Needed where the contractor carries design or advice responsibility. Check the period and the activities covered. | Asked for at tender, then never chased, so it lapses during a long contract. |
| RAMS (risk assessments and method statements), explained in RAMS: what a contractor should submit | That they are specific to the task and site, dated, signed off, and match the work now being done. | A generic document recycled from another job, or RAMS that were accepted once and not revisited when the scope changed. |
| CSCS and other competence cards | Card type and grade against the task, and the expiry printed on the card, which varies by card and holder. | A card that has expired, or a card of the right colour but the wrong occupation for the work. |
| Right to work record | That the contractor, as the employer, has completed the check for its own workers. You hold evidence that it does so. | Taking a contractor's word for it, or holding a record with no date and no named person who carried it out. |
| Company number and filing status | The Companies House number, that the company is active, and that the name on the insurance matches it. | Trading name on the paperwork differs from the registered company, so cover and contract point at different entities. |
| Accreditation or pre-qualification | Where your clients require a recognised health and safety assessment, that the contractor's status is current. | A membership logo on a quote that has not been checked against the current status. |
| Site induction record | That each person completed your induction for this site, and again after significant changes. | Inductions held on paper at the gate and never linked to the person's other records. |
Documents like the construction phase plan, COSHH assessments and the contractor's health and safety policy are also commonly requested. Which of them apply depends on the work and your contract.
Insurance, RAMS and competence: what each one really tells you
Insurance certificates are the easiest to collect and the easiest to misread. A certificate shows that cover existed on the date it was issued. Policies usually run for a year, so what you need is the period, the entity and the limit, tracked against the date. For the full list of policies and checks, see our guide to tracking contractor insurance certificates.
RAMS are different in kind. They do not expire on a fixed date, but they go stale: the task changes, the site layout changes, a new hazard appears. The useful control is to require them per task or per site, record who reviewed them and when, and ask for a fresh version when the scope moves.
Competence cards such as CSCS carry the date on the face of the card, and the term varies by card type and holder. That is why a tracker should read the printed expiry rather than add a fixed number of years to an issue date. A card also proves a level of training, not that the person is the right fit for a particular task, so the grade and occupation still need a human to look at them.
Import your contractors from CSV, start from the UK catalogue and let the status matrix show what is missing or expiring. The interactive demo uses sample data, so you can explore it before loading anything of your own.
A repeatable routine for UK contractor compliance
The steps are the same whether you use a spreadsheet or software. Most gaps appear when the first step is skipped or the last one is left to one person's memory.
Define what each contractor type must provide
Decide the company documents, the per-person documents and the per-site extras, and record how long each stays valid. A short list that you enforce beats a long one nobody reads.
Ask before they arrive on site
Request documents when the contractor is appointed, not at the gate. Name the person and the document, with a date by which it is needed.
Review against the requirement
Open the file. Check the entity, the period, the limit or grade and the signature, and reject what does not match, with a reason.
Match the company to Companies House
Record the company number so that insurance, accreditation and contract all refer to the same legal entity.
Renew before it lapses
Decide how many days before expiry a renewal task opens, so a lapse is a planned job and not a surprise at a site gate.
Keep a record you can show
Be able to say what was checked, by whom and when, and produce a dated report for a client or an auditor.
What vetting data to keep, and what to leave out
Compliance records about individuals are personal data, so UK data protection law applies to how you collect, store and share them. In general terms, collect what you need for a stated purpose, keep it only as long as that purpose lasts, and limit who can see it. The Information Commissioner's Office publishes guidance if you want to check the detail.
For right to work, the check is the employer's duty for its own workers, so for contractor staff the sensible approach is usually to hold evidence that the contractor runs its checks, not copies of every passport. Where you do hold identity documents, restrict access to the people who need them. Agree retention periods with your data protection lead and review them when the contract ends.
Role-based access matters here. In AuditSci, access is set by role, so a reviewer who approves insurance certificates does not need to see everything an administrator sees.
How AuditSci handles UK contractor compliance
AuditSci works at two levels, the contractor company and each person it sends, which fits how UK compliance is actually split.
Start from a UK catalogue and edit it
The suggested United Kingdom catalogue includes company documents such as the certificate of incorporation, Companies House filing status, employers' liability, public liability and professional indemnity insurance and RAMS, plus person-level items like right to work, CSCS and other competence cards and site induction records. You add, retire and change anything to match your contracts.
Company-level requirements
Requirements can apply to the contractor company itself, so a missing insurance certificate shows against the company, not against whichever worker happens to be on site. Requirements from a particular client contract can be added on top.
Validity rules that fit the document
Each requirement is permanent, periodic with a term, or valid until the date printed on the document. That last option suits cards such as CSCS, where the expiry varies by holder.
Request by phone link, no app
The contractor receives an individual link by email, opens it on a phone, sees what is outstanding and uploads or photographs the document. No app, no account, no password.
A person reviews every document
AI-assisted reading is included in every plan. It only proposes fields such as the holder and the expiry. A reviewer confirms or corrects them, and nothing is approved automatically.
Expiry alerts and an audit trail
You choose how early a renewal window opens. The status matrix shows what is valid, expiring, expired or missing, email notices can be switched on, and every action is recorded with author, date and time. Reports export as CSV and PDF.
A starting checklist for a new UK contractor
Use this as a draft and adjust it to your sector and client contracts. For a longer pre-start list, see the contractor onboarding documents checklist, and for the wider process the guide to contractor document tracking.
Company
- Companies House number and active status
- Employers' liability certificate, period and entity checked
- Public liability certificate, limit checked against the contract
- Professional indemnity where design or advice is involved
- Health and safety policy and task-specific RAMS
- Accreditation or pre-qualification status where your client requires it
Each person
- Photo identification
- Evidence that the employer completed the right to work check
- CSCS or other competence card, with the printed expiry
- Task-specific training certificates
- Your site induction record
Each project or site
- Construction phase plan where the project requires one
- Any extra documents the client asks for on this site
- Agreed handling of personal data under UK GDPR
People, companies and training, in one dashboard.
Company documents and their crew's, in one place.
Registration, insurance and compliance certificates for each contractor, with expiry and owner.
- Each contractor gets its own upload link
- An approval category sets what is required
- Client contracts can add requirements
- Company registrationActive statusValid
- Tax compliance certificateGood standingValid
- Employer's liability insuranceCertificateExpires in 18 days
- Public liability insuranceRequested by linkPending
Automate the routine work that takes your team's time.
Requirements assigned automatically by profile
Define what each role requires at each site once. Assign a person and what they must provide follows.
Expiry alerts
Configurable alerts and tasks with owners and deadlines.
Submission from the phone, no app
The worker gets a personal link by email and submits evidence from their phone. No account or password.
Complete audit trail
Every creation, change, approval and rejection is recorded with author, date and time. Nothing is overwritten.
Plans for every size of operation.
Essential and Start include a 14-day free trial, no card and no minimum term. From the Operations plan up (150 people or more), the subscription is by proposal, with a scheduled demo and a 6-month minimum term on the monthly plan.
Essential
For small teams getting document tracking under control.
Start
For teams building a repeatable document process.
Operations
For operations with contractors and more than one site.
6-month minimum term on the monthly plan. 7-day commercial guarantee after signing.
Scale
For operations running several jobs at once.
6-month minimum term on the monthly plan. 7-day commercial guarantee after signing.
Enterprise
For organizations facing formal external audits.
6-month minimum term on the monthly plan. 7-day commercial guarantee after signing.
Every plan includes the admin dashboard, worker and contractor portal, contractor companies, client contracts, access roles, CSV import, audit trail and exportable reports. Support by WhatsApp and email on the Start and Essential plans; assisted implementation (paid) on the others. AI-assisted reading is included in every plan.
No credit card requiredQuestions about this topic
It is the routine of defining what documents you require from contractors and their workers, collecting them, checking them and tracking their expiry dates. The aim is a reliable answer to who is cleared to work, plus a record you can show to clients and auditors.
Reduce the risk of expired documents and the workload on your team.
Quick setup and CSV import: bring your team in and track expirations, pending items and approvals from one dashboard. No credit card required.
No credit card required
AuditSci